Samsung LE32C579 Satellite System Setup, Cable Search Option, Editing channels, Other Features

Satellite System Setup

The PIN input screen appears. Enter your 4 digit PIN number. Satellite System Setup is available when Antenna is set to Satellite. Before running Auto Store, set Satellite System Setup. Then channel scan is run normally.

■■ Satellite Selection: You can choose the satellites for this TV.

■■ LNB Power (Off / On): Enables or disables the power supply for the LNB.

■■ LNB Settings: Configures the outdoor equipment. Satellite: Selects the satellite for receiving digital broadcasts.

Transponder: Selects a transponder from the list or adds a new transponder.

DiSEqC Mode: Selects DiSEqC mode for the selected LNB.

Lower LNB Oscillators: Sets the LNB oscillators to a lower frequency.

Upper LNB Oscillators: Sets the LNB oscillators to a higher frequency.

Tone 22 khz (Off / On / Auto): Selects the Tone 22 kHz depending on the LNB type. For a universal LNB it should be Auto.

Signal Quality: Display the current status of broadcasting signal.

■■ Positioner Settings: Configures the antenna positioner. Positioner (Off / On): Enables or disables the positioned control.

Positioner Type (USALS / DiSEqC 1.2): Sets the positioned type between DiSEqC 1.2 and USALS(Universal Satellite Automatic Location System).

––My Longitude: Sets the longitude for my location.

––My Latitude: Sets the latitude for my location.

––Satellite Longitude Settings: Sets the longitude of user defined satellites.

User Mode: Sets the position of satellite antenna according to each satellite. If you store the current position of satellite antenna according to a certain satellite, when the signal of that satellite is needed, the satellite antenna can be moved to pre-populated position.

––Satellite: Selects the satellite to set the position for.

––Transponder: Selects a transponder from the list for signal reception.

––Moving Mode: Selects the movement mode between discrete and continuous movement.

––Step Size: Adjusts the step size degrees for the antenna rotation. Step Size is available when Moving Mode is set to Step.

––Go to Stored Position: Rotates the antenna to the stored satellite position.

––Antenna Position: Adjusts and stores the antenna position for the selected satellite.

––Store Current Position: Stores current position as the selected positioner limit.

––Signal Quality: Display the current status of broadcasting signal.

Installer Mode: Sets limits to the scope of movement of satellite antenna or reset the position. Generally, installation guide uses this function.

––Limit Position (East / West): Selects the direction of the positioner Limit.

––Antenna Position: Adjusts and stores the antenna position for the selected satellite.

––Store Current Position: Stores the current position as the selected positioner Limit.

––Go to Zero: Moves the antenna to the reference position.

––Reset Positioner Limit: Allows the antenna to rotate over the full arc.

■■ Reset All Setting (OK / Cancel): All satellite settings will be reset to the initial values.

¦¦ Editing channels

Channel Manager Option Menu

(in Channel Manager)

1.Select a channel and press the TOOLS button.

2.Edit the channel name or number using the Edit Channel Name or Edit Channel Number menu.

■■ Edit Channel Name (analogue channels only): Assign your own channel name.

■■ Edit Channel Number (digital channels only): Edit the number by pressing the number buttons desired.

¦¦ Other Features

Cable Search Option

(depending on the country)

Sets additional search options such as the frequency and symbol rate for a cable network search.

■■ Freq.Start / Freq.Stop: Set the start or stop frequency (differs in each country)

■■ Modulation: Displays available modulation values.

■■ Symbol Rate: Displays available symbol rates.

English 13

03 Basic Features