Samsung LE37C579 Antenna Air / Cable / Satellite, Auto Store, Manual Store, Retuning channels

Basic Features

Channel Menu

¦¦ Retuning channels

Antenna (Air / Cable / Satellite)

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system). Country

The PIN input screen appears. Enter your 4 digit PIN number.

■■ Digital Channel: Change the country for digital channels.

■■ Analogue Channel: Change the country for analogue channels.

Auto Store

Scans for a channel automatically and stores in the TV.

✎✎Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked using the Child Lock function, the PIN input window appears.

When Antenna Source is set to Air or Cable:

■■ Antenna Source (Air / Cable / Satellite ): Select the antenna source to memorise.

■■ Channel Source (Digital & Analogue / Digital / Analogue): Select the channel source to memorise.

When selecting Cable → Digital & Analogue or Digital: Provide a value to scan for cable channels.

Search Mode (Full / Network / Quick): Scans for all channels with active broadcast stations and stores them in the TV.

✎✎ If you set Quick, you can set up Network, Network ID, Frequency, Modulation, Symbol Rate manually by press the button on the remote control.

Network (Auto / Manual): Selects the Network ID setting mode among Auto or Manual.

Network ID: When Network is Manual, you can set up Network ID using the numeric buttons.

Frequency: Displays the frequency for the channel. (differs in each country)

Modulation: Displays available modulation values.

Symbol Rate: Displays available symbol rates.

When Antenna Source is set to Satellite:

■■ Channel Type (All / TV / Radio): Select the Channel type to memorise.

■■ Satellite (All / Astra 19.2E): Selects the satellite to scan.

■■ Scan Mode (All Channels / Free Channels Only): Selects the scanning mode of the selected satellite.

12 English

Manual Store

Scans for a channel manually and stores in the TV.

✎✎If a channel is locked using the Child Lock function, the PIN input window appears.

When Antenna Source is set to Air or Cable:

■■ Digital Channel (Channel, Frequency, Bandwidth): (available in DTV mode) When scanning has finished, channels are updated in the channel list.

■■ Analogue Channel (Programme, Colour System, Sound System, Channel, Search, Store): If there is abnormal sound or no sound, reselect the sound standard required.

✎✎Channel mode

xx P (programme mode): When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode.

xx C (aerial channel mode) / S (cable channel mode): These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.

When Antenna Source is set to Satellite:

■■ Satellite: Selects the satellite using the up/down buttons.

■■ Transponder: Selects the transponder using the up/ down buttons.

■■ Scan Mode (All Channels / Free Channels Only): Selects either free or all channels to store.

■■ Network Search (Disable / Enable): Enable / Disable network search using the up/down buttons.

■■ Signal Quality: Display the current status of broadcasting signal.

✎✎Information on a satellite and its transponder is subject to change depending on the broadcasting conditions.

✎✎When setting is completed, move to Search and press the ENTEREEbutton. Channel scan is started.