6
Getting Started
English

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.
Preset: Connecting the mains and ante nna.
✎

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
P
button. Plug & Play is available only when the Input source is set to TV.
To return to the previous step, press the red button.
✎
1Selecting a language Press the ▲ or ▼ button, then press the ENTER
E
button.
Select the desired OSD (On Screen Display) language.
2Selecting Store Demo
or Home Use
Press the ◄ or ► button, then press the ENTER
E
button.
Select the
yHome Use mode. Store Demo Mode is for retail
environments.
Return the unit’s settings from
yStore Demo to Home Use
(standard): Press the volume button on the TV. When the OSD
volume is displayed, press and hold MENU for 5 sec.
3Selecting a country Press the ▲ or ▼ button, then press the ENTER
E
button.
Select the appropriate country. If the desired country does not exist on the menu, select
Others.
After selecting the country i n the Country menu, some model s may proceed with an
✎
additional option to setup the pin numbe r.
When you input the PIN number,
✎
0-0-0-0 is not available.
4Selecting an antenna Press the ▲ or ▼ button, then press the ENTER
E
button.
Select Air or Cable.
5Selecting a channel Press the ▲ or ▼ button, then press the ENTER
E
button.
Select the channel source to memorise. When setting the antenna source to Cable, a step
appears allowing you to assign numerical values (channel frequencies) to the channels.
For more information, refer to Channel → Auto Store. (P. 12)
Press the
✎
ENTER
E
button at any time to interrupt the memoris ation process.
6Setting the Clock
Mode
Set the Clock Mode automatically or manually.
Press the ▲ or ▼ button to select Auto, then press t he ENTER
E
button.
7Viewing the HD
Connection Guide.
The connection method for the best HD screen quality is displayed.
8Enjoy your TV. Press the ENTER
E
button.
If You Want to Reset This Feature...
Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to
change the PIN number, use the Change PIN function.
Power Input
VHF/UHF Antenna
Cable
R-AUDIO-L PRPBY
ANT OUT
or
BN68-02791AEGH_00Eng(1-25).indd 6 3/12/2010 1:00:06 PM