4Screen Adjustment

4.3.2Position

Adjusts the picture position. Position is only available if Picture Size is set to Zoom1, Zoom2, Screen fit or Custom.

To use the Position function after selecting Zoom1, Zoom2 follow these steps.

1Press the button to select Position.

2Press the [] button.

3Press the or button to move the picture up or down.

4Press the [] button.

5Select Close by pressing the and buttons sequentially. To reset the picture position, press Reset.

To use the Position function after selecting Screen Fit in HDMI (1080i/1080p) or Component (1080i/1080p) or Custom, follow these steps.

1Press the button to select Position.

2Press the [] button.

3Press the /// button to move the picture.

4Press the [] button.

5Select Close by pressing the and buttons sequentially.

If you want to reset the picture to its original position, select Reset in the Position screen. The

picture will be set to its default position.

4.3.3PC Screen Adjustment

Available in PC mode only.

Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, use the Coarse function to adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned with the center of screen.

Position: To adjust the PC’s screen position if it is not centered or does not fit the product screen. Press the or button to adjust the Vertical Position. Press the or button to adjust the Horizontal Position.

Image Reset: Resets the image to the default settings.

4.3.4Resolution Select

If the picture is not normal even when the resolution of the graphics card is one of the following, you can optimize the picture quality by selecting the same resolution for the product as the PC using this menu.

Available resolutions: Off / 1024 x 768 / 1280 x 768 / 1360 x 768 / 1366 x 768

The Resolution Select option is only enabled when the input source is PC.

4 Screen Adjustment 102