8System
Problem |
| Possible Solution |
|
|
|
The message “Connecting to | | You cannot use the remote control when you are configuring |
Anynet+ device...” appears on |
| Anynet+ or switching to a view mode. |
the screen. | | Use the remote control after the product has completed Anynet+ |
| ||
|
| configuration or has finished switching to Anynet+. |
|
|
|
The connected device is not | | Check whether or not the device supports Anynet+ functions. |
displayed. | | Check whether or not the HDMI cable is properly connected. |
| ||
| Check whether Anynet+ | |
|
| setup menu. |
| Search Anynet+ devices again. | |
| Anynet+ requires an HDMI connection. Some HDMI cables may | |
|
| not support Anynet+ functions. |
| If the connection is terminated because there has been a power | |
|
| failure or the HDMI cable has been disconnected, please repeat |
|
| the device scan. |
|
|
|
8.13 DivX® Video On Demand
O MENUm 
System 
DivX® Video On Demand 
ENTER
Shows the registration code authorized for the product. If you connect to the DivX web site and register using that code, you can download the VOD registration file.
For more information about DivX® VOD, visit “http://vod.divx.com”.
8.14 Network Remote Control
O MENUm 
System 
Network Remote Control 
ENTER
Turn on/off or give permission to Samsung mobile phone devices to connect with and control the product.
You must have a Samsung Mobile phone/device which supports Wireless Remote Control. For more details, refer to each device’s manual.
8 System 151