10 MagicInfo Lite

10.2 Network Schedule

10.2.1 Connecting to a server

To use the MagicInfo Lite Server, the clock on the monitor must be set through the server (web).

To use local schedules and AutoPlay only, without using the MagicInfo Lite Server, the clock must be set using the remote control.

Network setup

To run MagicInfo Lite, connect to a network.

Refer to 123 page for details about the Network Settings menu.

Server setup

Go to MENU Network MagicInfo Lite Settings Server. Next, enter the server information.

(E.g.: http://192.168.0.10:7001/MagicInfo/)

MagicInfo Lite

Server

Access Periodically

Server Address

192.168.0.10

Port

7001

Apply

Cancel

Configuring the FTP mode and default storage space

Default Storage: Specify the location you want to save content (downloaded from the server) to.

Internal Memory: Save the content to the internal memory of the product.

USB memory: Save the content to USB memory.

If a network schedule is running when USB memory is not connected, the default content will run.

10 MagicInfo Lite 159