] again.
], and then press [
Select WPS(PBC), press [
Go to Network Setting screen.
1
2
3 Press the WPS(PBC) button on your router within 2 minutes. Your product automatically acquires all the network setting values it needs and connects to your network.
7.1.5 WPS(PBC)
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow these steps:
Repeat the same entry process for Subnet Mask, Gateway, and DNS Server.
Press the
button to go to the Subnet Mask fields, and then press [
].
When done entering the IP Address, press [
].
14
15
16
17 When done, select OK at the bottom of the page, and then press [ ]. The network connection screen appears and the verification process starts. When the connection has been verified, the “Internet is connected successfully.” message appears.
Repeat the entry process for each field in the IP Address.
If you make a mistake when entering a number, re-enter the number to correct it. You can also press the or button to change the number one unit at a time.
Enter the next portion of the IP Address. Press the
button to go to the next field.
12
13
Network
11 Enter the first portion of the IP Address (for example, 105) into the first entry field using the number keys on your remote. Press the button to go to the next field.

7

4The network connection screen appears, and network setup is done.

7.1.6One Foot Connection

The One Foot Connection function lets you connect your Samsung product automatically to a Samsung wireless routers. If your wireless router does not support One Foot Connection, you must connect using one of the other methods.

You can check for equipment that supports One Foot Connection on www.samsung.com.

How to set up using One Foot Connection

1Turn on the Samsung wireless router and the product.

2Go to Network Settings screen.

3Select One Foot Connection, and press [], then press [] again.

4Place the wireless router in parallel with and no farther away than 25cm(about 9 3/4 inches) of Samsung Wireless Adapter.

7 Network 129