LAN Connection for Static IP Environment

The procedures to set up the network using a static IP address are described below. You have to manually enter the IP address, subnet mask, gateway, and DNS that are provided by your Internet Service Provider (ISP).

The LAN Port

TV Rear Panel

1.

Connect the [LAN]

 

port on the rear

 

 

on the Wall

 

 

panel of the TV

 

 

 

 

 

 

and the LAN port

 

 

 

on the wall using

 

 

 

the LAN cable.

1

LAN Cable

 

 

You can connect the LAN via a Sharer (Router).

The LAN Port on

IP Sharer

TV Rear Panel

the Wall

LAN Cable

LAN Cable

The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer.

If you are using a static IP address, your ISP will inform you of the IP address, subnet mask, gateway, and DNS. You must enter these values to complete the network settings. If you do not know the values, ask your network administrator.

For the information on how to configure and connect a Sharer (Router), refer to the owner’s manual for the corresponding product.

You can connect the TV to the LAN directly without connecting it through a Sharer (Router).

If you use an IP Sharer (IP Router) that supports DHCP, you can set up the device as either DHCP or static IP.

For the procedures to use a static IP address, ask your Internet Service Provider.

English - 83

Page 85
Image 85
Samsung LN52A650A1F user manual LAN Connection for Static IP Environment