Samsung LN52A650A1F user manual Setting the Film Mode, Setting the Blue Only Mode, Demo

Setting the Film Mode

The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality.

1.Follow the “Activating Picture Options” instructions numbers 1 and 2. (Refer to page 25)

2.Press the ▲ or ▼ button to select “Film Mode”, then press the ENTER button.

3.Press the ▲ or ▼ button to select “Off” or “Auto”, then press the ENTER button.

Press the EXIT button to exit.

➣“Film mode” is supported in TV, Video, S-Video, Component (480i / 1080i) and HDMI (480i / 1080i).

Setting the Blue Only Mode

This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Color and Tint of video equipment such as DVD players, Home Theaters, etc.

Using this function, you can adjust the Color and Tint to preferred values appropriate to the signal level of each video device using the Red/Green/Blue/ Cyan/Magenta/Yellow Color Bar Patterns, without using an additional Blue Filter.

1.Follow the “Activating Picture Options” instructions numbers 1 and 2. (Refer to page 25)

2.Press the ▲ or ▼ button to select “Blue Only Mode”, then press the

ENTER button.

3.Press the ▲ or ▼ button to select “Off” or “On”, then press the ENTER button.

Press the EXIT button to exit.

➣“Blue Only Mode” is available when the picture mode is set to “Movie” or “Standard”.

Setting the Auto Motion Plus 120Hz (LN40A650A1F, LN46A650A1F, LN52A650A1F)

Removes drag from fast scenes with a lot of movement to provide a clearer picture.

1.Follow the “Activating Picture Options” instructions numbers 1 and 2. (Refer to page 25)

2.Press the ▲ or ▼ button to select “Auto Motion Plus 120Hz”, then press the

ENTER button.

3.Press the ▲ or ▼ button to select “Off”, “Low”, “Medium”, “High” or “Demo”, then press the ENTER button.

•Off: Switches Auto Motion Plus 120Hz off.

•Low: Sets Auto Motion Plus 120Hz to minimum.

•Medium: Sets Auto Motion Plus 120Hz to medium.

•High: Sets Auto Motion Plus 120Hz to maximum.

•Demo: Displays the difference between Auto Motion Plus 120Hz on and off modes. The screen after applying “Auto Motion Plus 120Hz” appears on the left.

Press the EXIT button to exit.

➣If you enable “Auto Motion Plus 120Hz”, noise may appear on the screen. If this occurs, set “Auto Motion Plus 120Hz” to “Off”.

Picture Options
Color Tone	: Normal
Size	: 16:9
Digital NR	: Auto
DNle	: Off
HDMI Black Level	: Normal
Film Mode	: Off	►
Blue Only Mode	: Off
	▼
Move	Enter	Return
Picture Options
Color Tone	: Normal
Size	: 16:9
Digital NR	: Auto
DNle	: Off
HDMI Black Level	: Normal
Film Mode	Off
	: Off
	Auto
Blue Only Mode	: Off
Move	Enter	Return
Picture Options
	▲
Size	: 16:9
Digital NR	: Auto
DNle	: Off
HDMI Black Level	: Normal
Film Mode	: Off
Blue Only Mode	: Off	►
Auto Motion Plus 120Hz : Low
Move	Enter	Return
Picture Options
Size	: 16:9
Digital NR	: Auto
DNle	: Off
HDMI Black Level	: Normal
Film Mode	: Off
Blue Only Mode	Off
	: Off
	On
Auto Motion Plus 120Hz : Low
Move	Enter	Return
Picture Options
	▲
Size	: 16:9
Digital NR	: Auto
DNle	: Off
HDMI Black Level	: Normal
Film Mode	: Off
Blue Only Mode	: Off
Auto Motion Plus 120Hz : Low		►
Move	Enter	Return
Picture Options
Size	: 16:9
Digital NR	: Auto
DNle	Off
	: On
HDMI Black Level	Low
	: Normal
Film Mode	Medium
	: Off
Blue Only Mode	High
	: Off
	Demo
Auto Motion Plus 120Hz : Low
Move	Enter	Return

English - 28