Wireless Network Setup

➣The menu is activated only if the Samsung Infolink Wireless adapter is connected. (See page 84)

➣If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP)

Settings are automatically configured.

➣The wireless IP sharer to be connected to this product must support DHCP.

Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.

2.Press the ▲ or ▼ button to select “Wireless Network Setup”, then press the

ENTER button.

3.Press the ENTER button to select “Internet Protocol Setup”.

4.Press the ▲ or ▼ button to select “Auto Setup”, then press the ENTER button.

➣The Internet Protocol is set automatically.

➣Select “Access Point Select” to check the network connectivity. (Refer to page 88)

Press the EXIT button to exit.

Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.

2.Press the ▲ or ▼ button to select “Wireless Network Setup”, then press the

ENTER button.

3.Press the ENTER button to select “Internet Protocol Setup”.

4.Press the ▲ or ▼ button to select “Manual Setup”, then press the ENTER button.

5.Press the ▲, ▼, ◄ or ► button to move to an item, and press the numeric button to configure the selected item. Press the ENTER button.

➣If you want to use a static IP address, refer to the user manual of your wireless IP sharer.

➣Select “Access Point Select” to check the network connectivity. (Refer to page 88)

Press the EXIT button to exit.

Wireless Network Setup

English - 87