Samsung LN52A650A1F Cable Network Setup, First, the Network selection must be set to Cable. See

Cable Network Setup

➣First, the “Network selection” must be set to “Cable”. (See page 84)

Auto Setup

If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically configured.

➣Please check if the LAN cable is connected. (See page 82)

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.

2.Press the ▲ or ▼ button to select “Cable Network Setup”, then press the

ENTER button.

Setup

Time
Network selection	: Cable
Cable Network Setup		►
Wireless Network Setup
V-Chip
Caption
External Settings
Entertainment	: Off
Energy Saving	: Off
PIP

3.Press the ENTER button to select “Internet Protocol Setup”.

4.Press the ▲ or ▼ button to select “Auto Setup”, then press the ENTER button.

➣The Internet Protocol is set automatically.

➣Select “Network Test” to check the network connectivity. (Refer to page 86)

Press the EXIT button to exit.

Cable Network Setup

Internet Protocol Setup : Auto
		AutoSetup
Network Test		Manual Setup
IP Address	:
		0	0	0	0
Subnet Mask	:	0	0	0	0
Gateway	:	0	0	0	0
DNS Server	:	0	0	0	0
Move			Enter		Return

Manual Setup

To connect the TV to the LAN using a static IP address, you must set up the Internet Protocol (IP).

➣Please check if the LAN cable is connected. (See page 83)

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.

2.Press the ▲ or ▼ button to select “Cable Network Setup”, then press the

ENTER button.

Setup

Time
Network selection	: Cable
Cable Network Setup		►
Wireless Network Setup
V-Chip
Caption
External Settings
Entertainment	: Off
Energy Saving	: Off
PIP

3.Press the ENTER button to select “Internet Protocol Setup”.

4.Press the ▲ or ▼ button to select “Manual Setup”, then press the ENTER button.

Cable Network Setup

Internet Protocol Setup : Auto Setup
		Auto Setup
Network Test		Manual Setup
IP Address	:
		0	0	0	0
Subnet Mask	:	0	0	0	0
Gateway	:	0	0	0	0
DNS Server	:	0	0	0	0
Move			Enter		Return

5.Press the ▲, ▼, ◄ or ► button to move to an item, and press the numeric button to configure the selected item. Press the ENTER button.

➣Select “Network Test” to check the network connectivity. (Refer to page 86)

Press the EXIT button to exit.

Cable Network Setup

Internet Protocol Setup : Manual Setup

Network Test

IP Address	:	0		0	0	0
Subnet Mask	:	0	0		0	0
Gateway	:	0	0		0	0
DNS Server	:	0	0		0	0
Move	0 ~ 9 Number			Enter		Return

English - 85