Samsung LS32E590CS/ZR, LS32E590CS/XV manual Removing the Stand

Removing the Stand

――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.

: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.

1	Place the protective Styrofoam (cushion) included in the	3
	package on the floor and place the product facing down
	on the Styrofoam, as shown in the image.
	If Styrofoam is unavailable, use a thick sitting mat.

2	While holding the upper part of the monitor with	4
	one hand, pull the stand neck with the other hand in the

arrow direction to detach the stand.

Turn the connecting screw at the bottom of the stand base to separate it.

Remove the stand neck from the stand base by pulling it in the direction of the arrow as shown in the figure.

20