victoryia
O P E R AT I O N
Storing Channels in Memory (Automatic Method)
1
First, select the correct signal source (Air, STD, HRC, IRC). See steps 1~2 on previous page.
Press the MENU button.
Press the
UP/DOWN 
buttons to select “Channel”, then press the ENTER 
button.
2
Press the
UP/DOWN 
buttons to select “Auto program”. Press the ENTER 
button.
3
Press the ENTER 
button.
The TV will begin memorizing all of the available channels.
4
After all the available channels are stored, the Auto program menu reappears.
Press the MENU button to exit.
To check the channels stored in memory
Press the CH 
/ 
button.
Only the channels stored in memory are selected.
To select channels over 100,
The TV automatically cycles
through all of the available channels and stores them in memory. This takes about one to two minutes.
Press ENTER 
at any time to interrupt the memorization process and return to the CHANNEL menu.
Ex) Press 
to select channel 108.
