English-51

Adjusting the Screen Quality

The purpose of the picture quality adjustment is to remove or reduce picture noise.

If the noise is not removed by fine tuning alone, then do the frequency adjustments to

the utmost and fine tune again. After the noise has been reduced, re-adjust the picture

so that it is aligned on the center of screen.

Press the PC button on the remote control to select the PC mode.
PC DISPLAY
2
Press the
UP/DOWN
buttons to select
“PC Setup”, then press
the ENTER button.
Press the
ENTER button to
select “Image Lock”,
then press the
ENTER button.
1
Press the MENU button
to display the menu.
Press the
UP/DOWN
buttons to select
“Setup”, then press the
ENTER button.
4
When you are satisfied with the settings, press the
MENU button repeatedly to return to normal viewing.
3
Press the
UP/DOWN
buttons to select
“Coarse or Fine”,
then press the
ENTER button.
Press the
LEFT/RIGHT
buttons to adjust the
screen quality, vertical
stripes may appear or
the picture may be
blurry.
<Adjusting Coarse>
<Adjusting Fine>
victoryia 50-59 1/10/04 1:04 AM Page 51