English-10
4
Connect a coaxial
cable between the
ANTENNA OUT
terminal on the
cable box and the
B–IN terminal on the
A/B switch.
5
Connect another
cable between the
other OUT terminal
on the splitter and
the A–IN terminal on
the RF (A/B) switch.
6
Connect the last
coaxial cable
between the OUT
terminal on the RF
(A/B) switch and the
VHF/UHF terminal
on the rear of the
TV.
INSTALLATION

After you’ve made this connection, set the A/B switch to the “A” position for normal

viewing. Set the A/B switch to the “B” position to view scrambled channels.

(When you set the A/B switch to “B,” you will need to tune your TV to the cable box’s

output channel, which is usually channel 3 or 4).

victoryia 01-14 1/10/04 1:03 AM Page 10