Toshiba service manual MR-3018 Adjustment June 2005 Toshiba TEC

(3)Close the RADF and check if the positioning pins fit the holes on the RADF.

Fig.5-3

[B]Adjustment

If the pins cannot be fitted into the holes, perform the adjustment according to the following procedure.

(1)Remove the right-hand hinge screw at the rear side.

Fig.5-4

(2)Loosen the left-hand hinge screw at the rear side.

Fig.5-5

MR-3018 Adjustment June 2005 © TOSHIBA TEC

5 - 2