
(3) Loosen the hinge screws at the front side. |
(4)Position the pins with the holes on the RADF by moving it so that the pins fit into the holes when the RADF is closed.
5 |
(5)Tighten the
June 2005 © TOSHIBA TEC |
5 - 3
(3) Loosen the hinge screws at the front side. |
(4)Position the pins with the holes on the RADF by moving it so that the pins fit into the holes when the RADF is closed.
5 |
(5)Tighten the
June 2005 © TOSHIBA TEC |
5 - 3