Toshiba MR-3018 service manual Original tray Take off the front cover

[E]	Original tray
(1)	Take off the front cover.		Feeder upper guide	Screw
	(	P.4-1 "[A] Front cover")
(2)	Take off the rear cover.
	(	P.4-2 "[B] Rear cover")
(3)	Take off the paper feeder unit.
	(	P.4-6 "[A] Paper feeder unit")
(4)	Remove 2 screws. Lift up the feeder upper
	guide by sliding it to the right.
Note:
	Do not pull the harness too strong.
				Screw
			Fig.4-10

(5)Disconnect 1 connector from the RADF con- trol PC board.

Fig.4-11

(6)Remove 1 screw and take off the bushing.

(7)Take off the original tray.

Original tray

Bushing

Screw

Fig.4-12

MR-3018 DISASSEMBLY AND ASSEMBLY June 2005 © TOSHIBA TEC

4 - 4