Toshiba MR-3018 service manual Solenoid

4.4Solenoid

[A]Original pickup solenoid (SOL1)

(1)Take off the original feed motor drive section.

( P.4-21 "[E] Original feed motor drive sec- tion")

(2)Disconnect one connector. Remove 2 screws and take off the original pickup sole- noid with the bracket.

Screw
Connector	Original pickup solenoid
Fig.4-66

(3)Remove 2 screws and take off the original pickup solenoid from the bracket.

Note:

When installing the original pickup solenoid, be sure to align the edge of the original pickup solenoid with the mark-off line on the frame.

Original pickup solenoid

Bracket

Fig.4-67

Mark-off line

Fig.4-68

MR-3018 DISASSEMBLY AND ASSEMBLY June 2005 © TOSHIBA TEC

4 - 24