Toshiba MR-3018 service manual Original exit/reverse motor M3

[F] Original exit/reverse motor (M3)
(1)	Take off the original feed motor drive section.
	(	P.4-21 "[E] Original feed motor drive sec-
	tion")
(2)	Disconnect 1 connector from the RADF con-
	trol PC board.
		Fig.4-63

(3) Remove 2 screws, and then take off the orig-	Original exit/reverse motor
inal exit/reverse motor with its bracket.

4

(4)Remove 2 screws, and then take off the orig- inal exit/reverse motor by sliding it from the bracket.

Fig.4-64

Bracket

Original exit/reverse motor

Fig.4-65

June 2005 © TOSHIBA TEC MR-3018 DISASSEMBLY AND ASSEMBLY

4 - 23