Pre-reading lower guide

[H] Pre-reading lower guide / pre-reading upper guide

(1)Take off the front cover.

(	P.4-1 "[A] Front cover")

(2)Take off the rear cover.

( P.4-2 "[B] Rear cover")

(3)Take off the jam access cover.

( P.4-2 "[C] Jam access cover")

(4)Take off the left cover.

(	P.4-3 "[D] Left cover")

(5)Remove 4 screws and take off the pre-read- ing lower guide.

Fig.4-35

(6)Disconnect 2 connectors. Remove 2 screws and take off the pre-reading upper guide.

Pre-reading upper guide

Fig.4-36

[I]Intermediate transport roller

(1)Take off the pre-reading upper guide.

( P.4-13 "[H] Pre-reading lower guide / pre-reading upper guide")

(2)Take off the read motor drive section.

( P.4-19 "[C] Read motor drive section")

(3)Remove 1 bushing, 1 E-ring, 1 pulley, 1 pin and 1 bushing from the rear side of the inter- mediate transport roller shaft.

(4)Remove 1 bushing from the front side of the intermediate transport roller shaft.

(5)Take off the intermediate transport roller.

Bushing
E-ring
Pulley
Pin
Bushing
Intermediate transport roller	Bushing
Fig.4-37

MR-3018 DISASSEMBLY AND ASSEMBLY

4 - 13

Toshiba MR-3018 service manual Pre-reading lower guide