Toshiba MR-3018 service manual Mark-off line

[B]Gate solenoid (SOL2)

(1)Take off the original pickup solenoid.

( P.4-24 "[A] Original pickup solenoid (SOL1)")

(2)Disconnect one connector. Remove 2 screws and take off the gate solenoid with the bracket.

	Gate solenoid
Screw
Connector	Screw
	Fig.4-69

(3)Remove 2 screws and take off the gate sole-

noid from the bracket. Gate solenoid

Fig.4-70

Note:

When installing the gate solenoid, be sure to align the edge of the bracket with the mark- off line on the frame.

Mark-off line

Fig.4-71

June 2005 © TOSHIBA TEC MR-3018 DISASSEMBLY AND ASSEMBLY

4 - 25