Toshiba MR-3018 service manual Connector Holder

[J]Intermediate transport sensor (S8)

(1)Take off the pre-reading upper guide.

( P.4-13 "[H] Pre-reading lower guide / pre-reading upper guide")

(2)Release 2 latches and take off the intermedi- ate transport sensor from the pre-reading upper guide.

Intermediate transport sensor

Fig.4-87

[K]Original exit/reverse sensor (S10)

(1)Take off the pre-reading lower guide.

( P.4-13 "[H] Pre-reading lower guide / pre-reading upper guide")

(2)Disconnect 1 connector.

(3)Open the RADF. Remove 2 screws, and then take off 2 holders and platen guide.

Connector
Fig.4-88
Holder	Screw

Platen guide

Holder Screw

Fig.4-89

June 2005 © TOSHIBA TEC MR-3018 DISASSEMBLY AND ASSEMBLY

4 - 31