Toshiba MR-3018 service manual General Description, Main Components

2.GENERAL DESCRIPTION

2.1Main Components

Original tray section

Drive/Control section

Original exit tray section

Feeding/Transporting section

2

	Fig.2-1
Location		Components
Feeding/Transporting	Pickup roller	Original empty sensor (S3)
section	Feed roller	Original length detection sensor (S4)
	Separation roller	Original registration sensor (S5)
	Registration roller	Original width detection sensor-1 (S6)
	Intermediate transfer roller	Original width detection sensor-2 (S7)
	Pre-reading roller	Original intermediate transport sensor(S8)
	Platen roller	Read sensor (S9)
	Post-reading roller	Original exit/reverse sensor (S10)
	Exit/reverse roller	Jam access cover sensor (S11)
	Reverse registration roller
Original tray section	Original width guide	Original tray sensor (S1)
	Original tray	Original tray width sensor (S2)
	Original reverse tray
Original exit tray section	Original exit tray
Drive/Control section		Original feed motor (M1)
		Read motor (M2)
		Original exit/reverse motor (M3)
		Fan motor (M4)
		Original pickup solenoid (SOL1)
		Gate solenoid (SOL2)
		RADF opening/closing sensor (S12)
		Jam access cover opening/closing switch (SW1)
		RADF control PC board (ADF)

June 2005 © TOSHIBA TEC MR-3018 GENERAL DESCRIPTION

2 - 1