Toshiba MR-3018 service manual Actuator

[G] Original width detection sensor-1 (S6)

(1)Take off the feeder lower guide.

( P.4-10 "[E] Feeder lower guide")

(2)Take off the actuator.

(3)Disconnect 1 connector. Release 2 latches and take off the original width detection sen- sor-1.

Actuator	Original width detection sensor-1
	Fig.4-84

[H] Original width detection sensor-2 (S7)

(1)	Take off the feeder lower guide.	Actuator	Original width detection sensor-2
	( P.4-10 "[E] Feeder lower guide")
(2)	Take off the actuator.
(3)	Disconnect 1 connector. Release 2 latches
	and take off the Original width detection sen-
	sor-2.

[I]Read sensor (S9)

(1)Take off the pre-reading upper guide.

( P.4-13 "[H] Pre-reading lower guide / pre-reading upper guide")

(2)Release 2 latches and take off the read sen- sor from the pre-reading upper guide.

Fig.4-85

Read sensor

Fig.4-86

MR-3018 DISASSEMBLY AND ASSEMBLY June 2005 © TOSHIBA TEC

4 - 30