Toshiba MR-3018 service manual Separation roller PM Take off the paper feeder unit

[D]	Separation roller [PM]
(1) Take off the paper feeder unit.			Feeder upper guide	Screw
	(	P.4-6 "[A] Paper feeder unit")
(2) Remove 2 screws. Slide the feeder upper
	guide to the right and raise it.
	Note:
	Do not pull the harness out with too much
	force.
				Screw
			Fig.4-23

(3)Remove 2 screws and take off the separation roller holder and separation roller unit.

Separation roller unit	Screw
	Separation roller holder
	Fig.4-24

(4)Remove 1 bushing and clip, and then take off

the separation roller.

Separation roller

T.B.D.

Clip

Fig.4-25

Bushing

June 2005 © TOSHIBA TEC MR-3018 DISASSEMBLY AND ASSEMBLY

4 - 9