Duplex copying:
(1)Turn the power ON while pressing [0] and [5] simultaneously, key in [366] and then press the [START] button.
(2)Enter the value.
•If the leading edge (F) margin of the copy image is larger than the (E) margin of the chart, enter a value smaller than the current one.
Note:
Changing one value shifts the copy image by 0.1 mm.
•If the leading edge (F) margin of the copy image is smaller than the (E) margin of the chart, enter a value larger than the current one.
Note:
Changing one value shifts the copy image by 0.1 mm.
(3)Press the [ENTER] button.
| June 2005 © TOSHIBA TEC |
5 - 12
