I N S T A L L AT I O N

Connecting to a Cable Box that Descrambles All Channels

1

Find the cable that is connected to the ANTENNA OUT terminal on your cable box.

2

Connect the other end of this cable to the TV ANTENNA terminal on the back of the TV.

This terminal might be labeled

“ANT OUT,” “VHF OUT,” or simply, “OUT.”

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.)

1

Find and disconnect the cable that is connected to the ANTENNA IN terminal on your cable box.

This terminal might be labeled

“ANT IN,” “VHF IN,” or simply, “IN.”

2

Connect this cable to a two-way splitter.

3

Connect a coaxial cable between an OUTPUT ter- minal on the splitter and the IN terminal on the cable box.

ENG 2.3

Page 14
Image 14
Samsung LTM 1525 manual Connecting to a Cable Box that Descrambles All Channels