ENG 5.3
Adjusting the Screen Quality
The purpose of picture quality adjustment is to remove or reduce picture noise. If the
noise is not removed by fine tuning alone, then do the frequency adjustments to the
utmost and fine tune again. After the noise has been reduced, re-adjust the picture so
that it is aligned on the center of screen
Press the PC button on the remote control to select the PC mode.
1
Press the MENUbutton to
display the menu.
Press the CH button to
select “PC”, then press
the VOL +button.
2
Press the CH button to
select “Coarse” or “Fine”.
3
Press the VOL + or VOL -
button to adjust the
screen quality, vertical
stripes appear or the pic-
ture may be blurry.
4
When you are satisfied with the settings, press the MENUbut-
ton repeatedly to return to normal viewing.
PC DISPLAY
<Adjusting the Coarse>
<Adjusting the Fine>