O P E R AT I O N
Storing Channels in Memory (Automatic Method)
1
First, select the correct signal source (ANT, STD, HRC, IRC). See steps 1~2 on previous page.
Press the MENU button.
Press the CH ▼ button to select “Channel”, then press the VOL + button.
2
Press the CH ▼ button to select “Auto program”.
3
Press the VOL + button. The TV will begin memorizing all of the available channels.
4
After all the available channels are stored, the Auto program menu reappears. Press the MENU button to exit.
▼ The TV automatically cycles through all of the available channels and stores them in memory. This takes about one to two minutes.
Press VOL+ at any time to interrupt the memorization process and return to the CHANNEL menu.
