Using SetIP program
This program is for the network IP setting using the MAC address which is the hardware serial number of the network printer card or interface. Especially, it is for the network administrator to set several network IPs at the same time.
You can only use SetIP program when your machine is connected to a network.
Setting Up the Printer
Set up for your printer will be different depending on which cable you use to connect the printer to your
For a Network-connected
SetIP program should be automatically installed during the printer driver installation.
NOTE: If you select Typical installation for a network printer during the printer driver installation, the SetIP program automatically runs after the installation. Follow the below instruction.
1The certificate window appears, click Trust.
2Print the machine’s network information report which includes your machine’s MAC address.
3 Click 
in the SetIP window to open the TCP/IP configuration window.
4Enter the network card's MAC address, IP address, subnet mask, default gateway, and then click Apply.
when you enter the MAC address, enter it without colon(:).
5The machine prints the network information. Confirm all the settings are correct.
6Close the SetIP program.
Starting the program
If you want to change your network printer IP setting, follow the below instruction.
1Print the machine’s network information report which includes your machine’s MAC address.
2Open the Library folder → Printers → Samsung → Your
printer model name → SetIP.
3Double click the SetIPApplet.html file.
4When a certificate window appears, click Trust.
5Click 
in the SetIP window to open the TCP/IP
configuration window.
6 Enter the network card's MAC address, IP address, subnet mask, default gateway, and then click Apply.
when you enter the MAC address, enter it without colon(:).
7The machine prints the network information. Confirm all
the settings are correct.
8Close the SetIP program.
32
NOTE: Some printers do not support a network interface. Before connecting your printer, make sure that your printer supports a network interface by referring to Printer Specifications in your Printer User’s Guide.
1Follow the instructions on “Installing Software” on page 31 to install the PPD and Filter files on your computer.
2Open the Applications folder → Utilities, and Print Setup Utility.
•For MAC OS 10.5, open System Preferences from the Applications folder, and click Print & Fax.
3Click Add on the Printer List.
•For MAC OS 10.5, press the “+” icon then a display window will pop up.
4For MAC OS 10.3, select the IP Printing tab. •For MAC OS 10.4, click IP Printer.
•For MAC OS 10.5, click IP.
5Select Socket/HP Jet Direct in Printer Type.
WHEN PRINTING A DOCUMENT CONTAINING MANY PAGES, PRINTING PERFORMANCE MAY BE ENHANCED BY CHOOSING SOCKET FOR PRINTER TYPE OPTION.
6Enter the printer’s IP address in the Printer Address field.
7Enter the queue name in the Queue Name field. If you cannot determine the queue name for your printer server, try using the default queue first.
8For MAC OS 10.3, if Auto Select does not work properly, select Samsung in Printer Model and your printer name in Model Name.
•For MAC OS 10.4, if Auto Select does not work properly, select Samsung in Print Using and your printer name in Model.
•For MAC OS 10.5, if Auto Select does not work properly, select Select a driver to use... and your printer name in Print Using.
Your printer’s IP address appears on the Printer List, and is set as the default printer.
9Click Add
Using Your Printer with a Macintosh
