Samsung ML-1651N, ML-1650 specifications Uneven Density, Background

Models: ML-1650 ML-1651N

1 67
Download 67 pages 54.48 Kb
Page 33
Image 33

Troubleshooting

4-2-7 Uneven Density

Description Print density is uneven between left and right.

 

Check and Cause

 

Solution

1.

The pressure force on the left and right

1.

Replace both the left and right Spring

 

springs of the transfer roller is not even,

 

Holder.

 

the springs are damaged, the transfer

 

 

 

roller is improperly installed, or the trans-

 

 

 

fer roller bushing or holder is damaged.

 

 

2.

The life of the Developer has expired.

2.

Occur in the developer cartridge, replace

 

 

 

the developer and try to print out.

3.The toner level is not even on the devel- oper roller due to the bad blade.

4-2-8 Background

Description Light dark background appears in whole area of the printing.

Digital Printer

Digital Printer

Digital Printer

Digital Printer

Digital Printer

 

Check and Cause

 

Solution

 

 

 

 

1.

Recycled recording paper has been

1.

B/S is not guaranteed when using recycled

 

used.

 

paper.

2.

The life of the Developer has expired.

2.

Replace the Developer that has expired.

3.

The up-to-down movement of the trans-

3.

Clean the busing part of the transfer roller.

 

fer roller is swift?

 

 

4. The HVPS is normal?

4. Replace the Developer if not solved by the

 

(Perform DCU diagnostic code 01~04)

 

above direction 1~3.

 

 

 

 

Samsung Electronics

4-9

Page 33
Image 33
Samsung ML-1651N, ML-1650 specifications Uneven Density, Background