Manuals / Samsung / Computer Equipment / Printer

Samsung ML-1651N, ML-1650 specifications Multi-Feeding, Paper rolled in the fuser

Models: ML-1650 ML-1651N

1 67

Download 67 pages 54.48 Kb

Page 39

Troubleshooting

4-3-5 Multi-Feeding

•Description Multiple sheets of paper are fed at once.

	Check and Cause		Solution
1.	Solenoid malfunction(the solenoid does not work	1.	Replace the solenoid if necessary.
	properly): Perform DCU mode : solenoid check 06.
2.	Pad-Friction is contaminated with foreign matter.(oil...)	2.	Clean the pad friction with soft clothe dampened
			with IPA(Isopropyl Alcohol).

3. The face of paper is blended.

3. Use the smooth paper.

4-3-6 Paper rolled in the fuser

•Description If contaminated at intervals of 57mm on the back of a paper.

Check and Cause		Solution

1. Contamination of the pressure roller.	1.	Disassemble the fuser, clean the area between the
(Background, Hot off set)		Heat-roller and Thermistor and remove the foreign
		matter of the pressure roller.
	2.	If background appears badly in the printing, fix it by
		referring to the solutions for background.
		(See 4-2-8 Background)

Samsung Electronics

4-15

Image 39

Samsung ML-1651N, ML-1650 specifications Multi-Feeding, Paper rolled in the fuser

Contents

Laser Printer Version no This manual is stated and provided for service description Read each caution carefully Safety PrecautionsReleasing Plastic Latches Precautions on Disassembly and ReassemblyElectronic Scale Tools for TroubleshootingToner ML-1650 ML-1651N EngineController PaperNetwork ML-1650 ML-1651N EnvironmentGeneral Precautions on Disassembly Releasing Plastic LatchesWhenever servicing the machine, you must perform as follows Transfer Roller Controller Board Pickup Assembly Main Cover MP Multi-Purpose Tray Exit AssemblyHvps board LSUSolenoid 10 FanDrive Assembly To remove the halogen lamp from the fuser assembly Fuser AssemblyTo remove the thermistor from the fuser assembly To remove the thermostat from the fuser assemblyGuide Feed & Erase Lamp MPF Assembly and Miscellaneous on MPF Assembly To replace the nockup plateTo replace the pickup roller To replace the Paper Empty PE sensor To replace the pickup holder and the Adjust End MPEngine Board and Miscellaneous To replace the exit board To remove the transfer guide To replace the actuator feedCause and solution of the malfunction How to use DCUCause and solution of Bad image Cause and solution of the bad dischargeHow to use DCU DCU SetupCode Self Diagnostic Mode Paper Path Layout Self Test ButtonDCU Panel ML-1650 Diagnostic Control Unit Quick ReferanceVertical White Line Cause and solution of Bad imageCheck and Cause Solution Vertical Black Line and BandBlack/White Spot Horizontal Black BandDark Image or a Black Light ImageBackground Uneven DensityGhost Satins on the Face Blank Page Print out Satins on BackCause and solution of the bad discharge Wrong Print Position2 JAM 4 JAM 3 JAMPaper rolled in the fuser Multi-Feeding7 OPC Cause and solution of the malfunction All LEDs blinking Fuser ErrorAll LEDs blinking Scan Error Not function of the gear of the fuser due to melting away Paper EmptyPaper Empty without indication Cover Open No lamp on when the cover is openDefective motor operation No PowerVertical Line Getting Curved Toner Cartridge Service Image Fault Signs Cause & Check Solution Light imageSigns and Measures at Poor toner cartridge Partially blankRecycled product Fault Signs Cause & Check Solution White Black spotFault Signs Cause & Check Solution Ghost & Image Printer is not working Cause and solutions of bad environment of the softwareUtilities program Abnormal Printing How to delete the data in the spool manager Spool ErrorExploded Views and Parts List Service Parts List Exploded Views and Parts List10-3 10-4 Cover Exploded View All Exploded Views and Parts ListFrame Exploded View Exit Exploded View Rack-MPF Exploded View Fuser Exploded View Drive Exploded View Pick-Up Exploded View Cassette Exploded View Video ControllerBlock Diagram Block DiagramSensor Engine Block DiagramVPS Connection Diagram