![](/images/new-backgrounds/1224154/22415473x1.webp)
Troubleshooting
4-3 The cause and solution of the bad discharge
4-3-1 Wrong Print Position
•Description Printing begins at wrong position on the paper.
Check and Cause | Solution |
|
|
Wrong sense time caused by defective feed sensor | Replace the defective actuator |
actuator. |
|
|
|
4-3-2 JAM 0
• Description
1. Paper is not exited from the cassette.
2.
|
| Check and Cause |
| Solution |
| 1. | Check the Solenoid by using DCU | 1. | Replace the solenoid. |
|
| diagnostic mode 06. |
|
|
EXIT SEN |
|
|
|
|
CASSETTE | 2. | Check if the pad is loose due to bad | 2. | Replace the |
| sealing of the |
| R, if necessary. | |
|
|
| ||
| JAM 0 |
|
|
|
| 3. | Check the surface of the |
|
|
|
| up for foreign matter. | 3. | Clean with soft cloth dampened with |
|
|
|
| IPA(Isopropyl Alcohol) or water. |
| 4. | If continuous clusters occur, check | 4. | Replace the |
|
| whether the assembly slot between |
| |
|
|
|
| |
|
| become open or is broken away. |
|
|
5.If the paper feeds into the printer rand Jam 0 occurs, perform DCU to check
Samsung Electronics |