ALIGNMENT & ADJUSTMENTS
6.3 Clearing Paper Jams
Occasionally, paper can be jammed during a print job. Some of causes include:
•The tray is loaded improperly or overfilled.
•The tray has been pulled out during a print job.
•The front cover has been opened during a print job.
•Paper that does not meet paper specifications has been used.
•Paper that is outside of the supported size range has been used.
If a paper jam occurs, the On Line/Error LED on the control panel lights red. Find and remove the jammed paper. If it is invisible, look inside the printer.
Do not use a pinset or a sharp metal tool when removing a jam.
The covering of a metal part can be removed which can cause an electric leakage.
6.3.1 In the Paper Exit Area (JAM2)
1)If the paper jams as it exits to the output tray and a long portion of the paper is visible, pull the paper straight out.
3)Loosen the paper if it is caught in the feed rollers. Then pull the paper gently out.
When you pull the jammed paper, if there is resis- tance and the paper does not move immediately, stop pulling. Continue with the next step.
2) Open the rear output tray.
Note: Please be careful when you open the rear cover. The inside of the printer is still hot.
4)Close the rear output tray. Open and close the front cover. Printing can be resumed.
Service Manual
