| Disassembly and Reassembly | |
5.12 Feed Roller |
| |
1. Before you remove the Fuser, you should | 5. Remove the Idle Gear and Feed Gear2. | |
remove: |
| |
- Top Cover(see page |
| |
- Drive Ass’y(see page | Feed Gear2 | |
| ||
2. Remove two screws from the Guide Paper and |
| |
take it out. |
| |
Guide paper |
| |
| Idle Gear | |
| 6. Remove the Feed Gear 1 Ass’y, as shown | |
| below. | |
3. Pull up the Feed Idle Bush and Feed Idle Shaft, | Feed Gear1 | |
as shown below. | ||
Ass'y | ||
Feed Idle |
| |
Shaft |
| |
Bush |
| |
| 7. Remove the Feed Roller and Feed Roller 1, as | |
| shown below. | |
4. Remove three screws from the Feed Bracket | Feed Roller | |
and take it out. | ||
| ||
Feed Bracket |
| |
| Feed Roller1 | |
| Service Manual | |
Samsung Electronics | ||
|
