T RO U B L E S H O OT I N G
7.5.3 Abnormal Printing
• Description
The printing is not working properly even when the cable has no problem. (even after the cable is replaced)
If the printer won't work at all or the strange fonts are repeated, the printer driver may be defec- tive or wrong setup in the CMOS Setup.
| Check and Cause |
| Solution |
|
|
|
|
1. | Set up the parallel port in the CMOS SETUP. | 1. | Select SPP(Normal) or ECP LPT Port the among |
|
|
| ECP, EPP or SPP in the CMOS Setup. |
2. | Printer Driver Error. | 2. | Check the printer in My Computer.(to see if the |
|
|
| printer driver is compatible to the present driver or |
|
|
| delete the old driver, if defective and reinstall the new |
|
|
| driver) |
3. | Error message from insufficient memory. | 3. | Delete the unnecessary files to secure enough |
| (The printing job sometimes stops or due to insufficient |
| space of the hard disk and start printing job again. |
| virtual memory, but it actually comes from the insuffi- |
|
|
| cient space of the hard disk.) |
|
|
|
|
|
|
Service Manual
