Sending a fax automatically
1.After loading a document, enter the number of the remote fax machine using the number keypad.
You can store
If you make a mistake while entering a number, move the cursor under the wrong digit by using ➛ or ❿, and correct the number or press Search/Delete to delete the number.
2.Press Start/Enter to dial the number.
The machine will scan the document and dial the number automatically. When the remote fax machine answers the phone, the document will be transmitted automatically.
Canceling transmission
Press Stop any time during the transmission. The machine continues to send the fax and the display shows a message warning you that the machine is in use. Press Stop again.
Confirming transmission
When the last page of your document has been sent successfully, the machine beeps and returns to standby mode.
If something went wrong during your fax transmission, an error message appears in the display. For a listing of error messages and their meanings, see page 3.6.
If you receive an error message, press Stop to clear the message and try to send the document again.
You can set your machine to print a confirmation report automatically each time a fax is successfully sent. For more information, see `MESSAGE CONF.’ on page 2.42.
2.10 Sending a Fax