Samsung Msys 6750 manual Assigning a group to a one-touch button

Models: Msys 6750

1 104
Download 104 pages 15.83 Kb
Page 67
Image 67

Assigning a group to a one-touch button

You can use a group number as one-touch dialing. Before you can use this feature, you must first register the group number (see ‘Storing a number for one-touch dialing’ on page 2.31), and then store the registered group number into an empty one-touch button.

1.Press and hold the one-touch button that you want to assign (01 through 20) for 2 seconds.

2.Press Speed/Status enter the group number, then press Start/Enter. The group number is stored in the selected one-touch button, and the display asks you to enter one-touch button for another group dial if you wish.

3.If you want to store another one-touch group dial numbers, repeat steps 1-3. If you want to return to standby mode, press Stop.

Using group dialing (multi-address transmission)

You can use group dialing for memory transmission, or delayed transmission.

Follow the procedure of the desired operation (Memory transmission -

p. 2.14, Delayed transmission - p. 2.12). When you come to a step in which the display requests you to enter the remote fax number, press the one- touch button to which you stored the group number. You can use only one group number at one operation. Then continue the procedure to complete the desired operation.

Your machine automatically scans the document loaded in the document tray into memory, and the machine will dial each of the numbers included in the group.

2.36 Automatic dialing

Page 67
Image 67
Samsung Msys 6750 manual Assigning a group to a one-touch button, Using group dialing multi-address transmission