Sound control
You can choose an alarm tone to sound when an error occurs (ALARM SOUND) or any key is pressed (KEY SOUND).
1.Press Menu, then press System Setup on the
2.Press " or ❷ until you find ‘SOUND CONTROL ?’.
3.Press Start/Enter. The display prompts you to turn ON or OFF the alarm sound.
4.Press 1 to turn the sound ON, or 2 to turn it OFF. You can also use ➛ or ❿ button to choose ‘ON’ or ‘OFF’, then press Start/Enter to confirm.
5.The display asks you to turn ON or OFF the key sound. Press 1 to turn the sound ON, or 2 to turn it OFF.
6.The display shows the next setup menu. To return to standby mode, press Stop.
Remote diagnosis protection
Remote diagnosis feature allows your machine to be checked by a service company from a remote place through the phone line.
If you do not want to use the remote diagnosis feature and want to protect your machine from being opened by an unauthorized person, you can enable this remote diagnosis protection feature.
1.Press Menu, then press System Setup on the
2.Press " or ❷ until you find ‘REMOTE DIAGNOSIS PROTECTION ?’, then press Start/Enter.
3.The display asks you to turn the feature ON or OFF. Press 1 to turn it ON, or 2 to turn it OFF.
4.The display shows the next setup menu. To return to standby mode, press Stop.
