Samsung NV70K2340RS/EE manual Power connection

Accessories					Power connection
The oven comes with different accessories that help you prepare different types of
							Plug the oven into an electrical socket. If
food.
							a plug-type socket is not available due to
							allowable current limitations, use a multi-
							pole isolator switch (with at least 3 mm
					L	N
							spacing in-between) in order to meet safety
							regulations. Use a power cord of sufficient
				01		02 03
							length that supports the specification H05
	Wire rack	Wire rack insert *
			Baking tray *				RR-F or H05 VV-F, min. 1.5~2.5 mm².
					01 BROWN or BLACK
					02 BLUE or WHITE		Rated current(A)			Minimum cross-
					03 YELLOW and GREEN					sectional area
								10 < A ≤ 16		1.5 mm2
								16 < A ≤ 25		2.5 mm2
	Universal tray *	Extra-deep tray *	Rotisserie spit *
							Check the output specifications on the label
							attached to the oven.
							Open the rear cover of the oven using a
							screwdriver, and remove the screws on the
							cord clamp. Then, connect the power lines to
	Rotisserie spit and	Telescopic rail *
							the relevant connection terminals.
	Shashlik *
							The (		)-terminal is designed for
	NOTE						earthgrounding. First connect the yellow
							and green lines (earthgrounding), which
Availability of accessories with an asterisk (*) depends on the oven model.							must be longer than the others. If you use

a plug-type socket, the plug must remain accessible after the oven is installed. Samsung is not responsible for accidents caused by missing or faulty earthgrounding.

WARNING

Do not step on or twist the wires during installation, and keep them away from heat-emitting parts of the oven.

English  7

Installation

NV70K2340RS_EE_DG68-00761A-00_EN.indd 7

2/1/2016 4:22:17 PM