Maintenance
NOTE
The catalytic parts are coated on either a single side or 3 sides, depending on the model.
Door removal
For normal use, the oven door must not be removed but if removal is necessary, for example, for cleaning purposes, follow these instructions.
CAUTION
The oven door is heavy.
Door Glass Removal
The oven door is equipped with three sheets of glass placed against each other. These sheets can be removed for cleaning.
1. Press the both buttons on the left and right sides of the door.
Maintenance
1. Open the door and flip open the clips at both hinges completely.
2.Close the door by approximately 70 °.
With both hands, grasp the sides of the oven door at its middle and
70 °
3.After cleaning, for attaching the door repeat the 1 and 2 steps in revers order. The clip on the hinge should be closed on
01
01 Glass 1
01 02
01Glass 1
02Glass 2
NOTE
2.Detach the covering and remove glass 1 and 2 from the door.
3.After cleaning the door glasses, for assembly repeat 1, 2 steps in revers order. Check the right locations of glass 1 and 2 with picture.
both side.
26 English
When assembly the inner glass 1, put printing to direction below.
