Samsung NZ643NCNCBK/EE manual Switching the appliance on, Select cooking zone and heat setting

Switching the appliance on

1.Touch the Lock control sensor for approximately 3 seconds.

2. The appliance is switched on using the On/Off		approx
control	sensor.
		1 sec.

Touch the On/Off control sensor for 1 second.

The digital displays will show .

After the On/Off control sensor has been actuated to switch on your appliance, a heat setting must be selected within approximately 10 seconds. Otherwise, the appliance will switch itself off for safety reasons.

Select cooking zone and heat setting

1. For selecting the cooking zone, touch the corresponding cooking zone’s key.

2.For setting and adjusting the power level,

touch the Heat setting selectors.

If more than one sensor is pressed for longer than 8 seconds, will

show in the heat setting display. To reset, touch the On/Off control sensor.

Switching the appliance off

To completely switch off the appliance, use the

On/Off control sensor.

Touch the On/Off control sensor.

es hob u

After switching off a single cooking zone or the entire cooking surface, the presence of residual heat will be indicated in the digital displays of the corresponding cooking zones in the form of an (for “hot”).

hob use _23

NZ643NCKCBK_EE_DG68-00461A-02_EN-121129.indd 23

2012-11-29 �� 5:12:24