Samsung NZ643NCNCBK/EE Setting the safety shutoff, There are two ways to use the timer, Control

Timer

There are two ways to use the timer:

Using the timer as a safety shutoff:

If a specific time is set for a cooking zone, the cooking zone will shut itself off once this period of time has elapsed. This function can be used for multiple cooking zones simultaneously.

Using the timer to count down:

The countdown timer cannot be used if a cooking zone has been switched on.

Setting the safety shutoff

The cooking zone(s) for which you want to apply the safety shutoff must be switched on.

1.Using the Timer control sensor, select the

cooking zone for which the safety shutoff time is to be set. After the first active cooking zone is selected, touching the timer’s control sensor will cause

the corresponding indicator to flash slowly. For example, the front left indicator

corresponds to the front left cooking zone. will appear in the timer display.

The next active cooking zone is selected by touching the Timer control sensor again.

2. Use the Timer setting selectors (

or ) to set the desired amount of time, for example, 15 minutes, after which the cooking zone will automatically switch itself off.

The safety shutoff is now activated.

To display the time remaining for any of the cooking zones, use the Timer

control	sensor.
The corresponding control indicator will begin to blink slowly.
The settings are reset using the Timer setting selectors (		or	). After the

set period of time has elapsed, the cooking zone automatically switches itself off,

an acoustic signal sounds as confirmation and the timer	display indicates .
To make the settings more quickly, touch any of the		or	control
sensors until the desired value is reached.

If the control sensor is touched first, the time setting will begin at 99

minutes; if the control sensor is touched first, the time setting will begin at 1 minute.

es hob u

hob use _25

NZ643NCKCBK_EE_DG68-00461A-02_EN-121129.indd 25

2012-11-29 �� 5:12:27