Installing the hob, Tools you will need

Installing the hob

WARNING

Be sure the new appliance is installed and grounded only by qualified personnel. Please observe this instruction. The warranty will not cover any damage that may occur as a result of improper installation.

Technical data is provided at the end of this manual.

Safety instructions for the installer

•A device must be provided in the electrical installation that allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm. Suitable isolation devices include line protecting cut - outs, fuses (screw type fuses are to be removed from the holder), earth leakage trips and contactors.

•With respect to fire protection, this appliance corresponds to EN 60335 - 2 -

6. This type of appliance may be installed with a high cupboard or wall on one side.

•The installation must guarantee shock protection.

•The kitchen unit in which the appliance is fitted must satisfy the stability requirements of DIN 68930.

•For protection against moisture, all cut surfaces are to be sealed with a suitable sealant.

•On tiled work surfaces, the joints in the area where the hob sits must be completely filled with grout.

•On natural, artificial stone, or ceramic tops, the snap action springs must be bonded in place with a suitable artificial resin or mixed adhesive.

•Ensure that the seal is correctly seated against the work surface without any gaps. Additional silicon sealant must not be applied; this would make removal more difficult when servicing.

•The hob must be pressed out from below when removed.

•A board can be installed underneath the hob.

•The ventilation gap between the worktop and front of the unit underneath it must not be covered.

8 English

Tools you will need


Pencil	Phillips Head Screwdriver			Ruler or Straightedge

Safety Glasses

Saber Saw

Drill

Connecting to the mains power supply

Before connecting, check that the nominal voltage of the appliance, that is, the voltage stated on the rating plate, corresponds to the available supply voltage. The rating plate is located on the lower casing of the hob.

WARNING

Shut off power to circuit before connecting wires to circuit.

The heating element voltage is AC 230 V~. The appliance also works perfectly on networks with AC 220 V~ or AC 240 V~. The hob is to be connected to the mains using a device that allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm, eg. automatic line protecting cut - out, earth leakage trips or fuse.

WARNING

The cable connections must be made in accordance with regulations and the terminal screws tightened securely.

WARNING

Once the hob is connected to the mains supply, check that all cooking zones are ready for use by briefly switching each on in turn at the maximum setting with suitable cookware.

NZ6000K NZ64N9777_NZ64N7777_DG68-01073A-00_EN+FI+NO+DA+SV.indb 8

2/19/2018 12:02:12 PM

NZ64N7777GK/E1, NZ64N9777GK/E1 specifications

The Samsung NZ64N9777GK/E1 is a state-of-the-art built-in induction cooktop that brings innovative technology and modern design to any kitchen. With its sleek and minimalist appearance, it seamlessly blends into contemporary kitchen interiors while offering an impressive range of features.

One of the key features of this cooktop is its powerful induction cooking technology. Induction cooking provides rapid heating and precise temperature control, making it an efficient option for home cooks. The Samsung NZ64N9777GK/E1 boasts multiple cooking zones, including a large Flex Zone that allows for versatile cooking options. This Flex Zone can accommodate pots and pans of various sizes, which is perfect for those who enjoy preparing multiple dishes simultaneously.

The cooktop supports a range of cooking modes, including a boost function that provides an extra burst of power for quick heating. This feature is especially useful for boiling water or searing meat, significantly reducing cooking times. Additionally, the intuitive touch controls enable users to adjust heat settings quickly and easily, providing a seamless cooking experience.

Safety is a priority with the Samsung NZ64N9777GK/E1, which includes features such as child lock and overheat protection. The child lock ensures that little hands can't accidentally turn on the cooktop, while the overheat protection automatically shuts off the cooking zones if they exceed safe temperatures.

Maintenance is made easy with its smooth glass surface, which is not only stylish but also easy to clean. Spills and splatters can be wiped away effortlessly, making post-cooking clean-up a breeze. The cooktop is also designed to deliver an even heat distribution, minimizing hot spots and ensuring well-cooked meals every time.

Moreover, the Samsung NZ64N9777GK/E1 is compatible with smart technology, allowing users to connect it to their smart home systems. This enables remote monitoring and control, further enhancing the convenience of modern cooking.

In summary, the Samsung NZ64N9777GK/E1 is an impressive induction cooktop that combines cutting-edge technology, safety features, and ease of use. Its stylish design and high efficiency make it a perfect addition to any modern kitchen, aimed at elevating the cooking experience for both novice cooks and culinary enthusiasts alike.

Samsung NZ64N7777GK/E1, NZ64N9777GK/E1 Installing the hob, Safety instructions for the installer

Models: NZ64N7777GK/E1 NZ64N9777GK/E1