Samsung NZ84F7NC6AB/EE manual Using the Touch Control Sensors, Switching the Appliance on

USING THE TOUCH CONTROL SENSORS

To operate the touch control sensors, touch the desired panel with the tip of your pointed finger until the relevant displays illuminate or go out, or until the desired function is activated.

Ensure that you are touching only one sensor panel when operating the appliance. If your finger is too flat on the panel, an adjacent sensor may be actuated as well.

SWITCHING THE APPLIANCE ON

1.When power is connected, first touch theLock control sensor for approximately 3 seconds.

2.The appliance is switched on using the

On/Off control sensor.approx3 sec.

Touch the On/Off control sensor for 3 seconds.

The digital displays will show .

After the On/Off control sensor has been actuated to switch on your appliance, a heat setting must be selected within approximately 10 seconds. Otherwise, the appliance will switch itself off for safety reasons.

SELECT COOKING ZONE AND HEAT SETTING

1.For selecting the cooking zone, touch

the corresponding cooking zone’s key.

2.For setting and adjusting the power

level, touch the Heat setting selectors.

use hob

hob use _23

(Best)NZ84F7NC6AB_EE_DG68-00512A_EN.indd 23 2013-05-06 �� 2:07:06