Chapter 9. Getting More Familiar with the XV-88 (System Functions)

Polarity (D Beam Polarity)

Switches the polarity of the D Beam controller.

With a setting of REVERSE, the direction of control for the D Beam controller will be inverted.

D BEAM RANGE

Lower (D Beam Range Lower)

Specifies the lower limit of the range of the D Beam controller. Values below this setting will not be output.

Upper (D Beam Range Upper)

Specifies the upper limit of the range of the D Beam controller. Values above this setting will not be output.

It is not possible to set the lower limit value above the upper limit, nor can you set the upper limit value below the lower limit.

D BEAM SENS

D Beam Sensitivity

This sets the D Beam Controller’s sensitivity. The higher the value set, the more readily the D Beam Controller goes into effect. Ordinarily, this is set to 5.

Phrase Preview Settings (PREVIEW)

Specifies how the phrase will play when you press [PHRASE

PREVIEW].

SYSTEM PREVIEW

Preview Mode (Preview Sound Mode)

SINGLE: The notes specified by Note 1–4 will sound successively one by one.

CHORD: The notes specified by Note 1–4 will sound simultaneously.

PHRASE: The Phrase associated with the Patch’s type/ category is played.

PREVIEW KEY

Note 1–4 (Preview Note Set 1–4)

Specify the pitch (C-1–G9) of the four notes that will sound when the Preview Mode parameter is set to either SINGLE or

CHORD.

If PHRASE is selected for the Preview Mode parameter, these settings will have no effect.

PREVIEW VELOCITY

Note 1–4 (Preview Velocity)

Specify the velocity (0–127) of the four notes that will sound when the Preview Mode parameter is set to either SINGLE or

CHORD.

If PHRASE is selected for the Preview Mode parameter, these settings will have no effect.

Chapter 9

177

Page 177
Image 177
Roland XV-88 owner manual Phrase Preview Settings Preview, System Preview, Preview KEY, Preview Velocity, 177