Roland XV-88 owner manual Effects Section, Front and Rear Panel

8 10

9 11

[RHYTHM]

Selects Rhythm Set mode. → (p. 39)

[ZONE]

When the XV-88 is in Performance mode, this switches it to the Zone mode. → (p. 57)

[SYSTEM]

Selects System mode. → (p. 168)

[UTILITY]

Selects Utility mode. → (p. 179)

6EFFECTS Section

Used to switch on and off the onboard effects (Multi-effects, Chorus, Reverb). When on, the button indicator for the effect is lighted. → (p. 105)

[MULTI]

Turns Multi-effects on/off.

[CHORUS]

Turns Chorus on/off.

[REVERB]

Turns Reverb on/off.

7

Display

Shows various information for the currently selected function or operation.

[PALETTE EDIT]/[LOCAL/TX]

PALETTE EDIT: Press this when you want to make changes to Patch or Performance settings using the Palette page.

→(p. 50, p. 58, p. 67, p. 94)

Front and Rear Panel

LOCAL/TX: When the indicator for this button is extinguished, the Local switch can be switched on/off. When the indicator is lit, the Transmit switch can be switched on/ off. Functions buttons are employed for this purpose.

→(p. 25)

[EDIT]

Press this button when you wish to adjust various settings. Use the function buttons to select the display screen for the parameter you wish to modify.

Function Buttons

The function of these buttons will depend on the operational mode and the status of the [EDIT] indicator. → (p. 25)

[1-8/9-16]

Use this button to select the group (1–8/9–16) of Parts or Zones to be selected by the function buttons. → (p. 25)

[EXIT]/[PANIC]

EXIT: Press this button when you wish to return to the Play page of each mode, or to cancel an operation without executing.

PANIC: If for some reason notes are stuck and continue sounding, hold down [SHIFT] and press this button to clear the stuck notes. → (p. 48)

[UNDO/COMPARE]

UNDO: Press this button to restore a modified value to the original value. → (p. 27, p. 49, p. 57, p. 67, p. 94) COMPARE: When saving or copying Tone settings, press this to check the sound at the save destination, or at the copy source. → (p. 164, p. 181, p. 183, p. 184)

8

VALUE Dial

This dial is used to modify values. If you hold down [SHIFT] as you turn the VALUE dial, the value will change in greater increments. → (p. 27)

CURSOR Buttons

Press these to switch pages and to move the cursor (the underline). → (p. 26)

In the Play page of each mode, pressing the CURSOR buttons while holding down [SHIFT] allows the remote control of external sequencers. → (p. 26, p. 204)

15