2.Press [UNDO/COMPARE].

The PATCH COMPARE page appears, making it possible to sound the save destination Patch.

Writing destination

3.Play the keyboard to sound the save destination Patch, then check whether you really want to overwrite it.

The Patch auditioned using the Compare function may sound slightly different than when it is played normally.

4.If you want to change the save destination, use the VALUE dial, [INC/+]/[DEC/-] or numeric keys to specify the save destination Patch number.

5.Press [UNDO/COMPARE] once again to return to the PATCH WRITE page.

6.Press [ENTER] to execute the save operation.

Registering Favorite Patches/ Rhythm Sets in the Favorite List

You can keep the Patches and Rhythm Sets that you like to use all in one place by registering them on the Favorite List. This list allows you immediate access to your favorite Patches and Rhythm Sets, whether they are stored internally, on Wave Expansion Boards, or on memory cards. Up to a total of 64 Patches and Rhythm Sets can be registered on the Favorite List.

1.Make sure that the Patch or Rhythm Set you wish to register is selected.

2.Hold down [SHIFT] and press [PATCH FINDER]. The FAVORITE LIST page will appear.

3.Use the VALUE dial, [INC/+]/[DEC/-] or numeric keys and specify the save-destination number.

No data is registered at the factory settings.

By holding down [SHIFT] and pressing [UNDO/ COMPARE], you can cancel the registration of the Patch and Rhythm Set that is registered to the currently specified number.

Chapter 8. Saving Sounds

You can press or to search for a registered number.

By holding down [SHIFT] and pressing or , you can find the empty number to which no data is registered. If no empty number can be found, “Favorite List Full” appears in the display.

4.Continue holding down [SHIFT], and the following display will appear.

5.Hold down [SHIFT] and press [ENTER] to execute the registration.

Registering Data Without Displaying the Favorite List

You can register data to the Favorite List directly from the PATCH PLAY and RHYTHM PLAY pages. This makes it simple to register data, without having to bring up the FAVORITE LIST page or specify a destination number for the registration.

1.Make sure that the Patch or Rhythm Set you wish to save is selected.

2.Continue holding down [SHIFT], and the following

display will appear.

fig.08-06

3.Hold down [SHIFT] and press [ENTER] to execute the registration and the display will briefly indicate “COMPLETED.”

Here, the data is registered to the lowest of the empty numbers to which no data is registered.

If there is no empty number to which data can be registered, “Favorite List Full” appears in the display, and the data cannot be registered.

Chapter 8

165

Page 165
Image 165
Roland XV-88 owner manual 165, Registering Data Without Displaying the Favorite List