Roland XV-88 owner manual Triple TAP Delay, 129

19: TRIPLE TAP DELAY

The Triple Tap Delay produces three delay sounds; center,

left and right.

Balance D

L in			2-Band	L out
			EQ
	Left Tap		Balance W
Triple Tap Delay		Center Tap
Feedback	Right Tap		Balance W
R in			2-Band	R out
			EQ
		Balance D

Delay C (Delay Time Center)

Adjust the time delay from the direct sound until when the center delay sound is heard.

Delay L (Delay Time Left)

Adjust the time delay from the direct sound until when the left delay sound is heard.

Delay R (Delay Time Right)

Adjust the time delay from the direct sound until when the right delay sound is heard.

Delay C, Delay L and Delay R parameters can be set as a note-value of a specified tempo. In this case, specify the value of the desired note.

When Delay C, Delay L and Delay R are Set as a Note Value

As the specified tempo, you may use either the Patch Tempo (p. 71) or the tempo clock of the XV-88’s system (p. 169).

Fbk (Feedback Level) #

Adjust the proportion (%) of the delay sound that is fed back into the effect. Negative (-) settings will invert the phase.

Level C (Center Level)

Adjust the volume of the center delay sound.

Level L (Left Level)

Adjust the volume of the left delay sound.

Level R (Right Level)

Adjust the volume of the right delay sound.

Chapter 7. Adding Effects

HF Damp

Adjust the frequency above which sound fed back to the effect will be cut. If you do not want to cut the high frequencies of the feedback, set this parameter to BYPASS.

LowGain (Low Gain)

Adjust the gain of the low frequency range.

Hi Gain (High Gain)

Adjust the gain of the high frequency range.

Balance (Effect Balance) #

Adjust the volume balance between the direct sound and the delay sound. With a setting of D100:0W only the direct sound will be output, and with a setting of D0:100W only the delay sound will be output.

Level (Output Level)

Adjust the output level.

Chapter 7

129